MACNA 2010 Rocked!

Posted: 11th September 2010 by admin in Exhibition
Tags: , ,

Reefbuilders has asked contributors to recount their MACNA 2010 experience – its my turn, so here goes! My MACNA 2010 really started when I arrived at the hotel at 11:55 pm on Thursday night. I expected to go to the room, go over my talk and get some much needed sleep (the day had started out at 5 am and involved sitting on an alligator, but that is a different story). When I got to the hotel, I was pulled over to a large group of reefers before I even got to check in. Then I got pulled to the hotel bar where there was an even larger group of reefers. When I finally got to my room at 3:30 am, I knew this MACNA was going to be great and as I drifted off to sleep I dreamed of friends, the Saturday night Manhattan Reefs’ party, and the fabulous reef related info that was going to be coming my way over the next few days. There was a lot to get to, and I didn’t have time to get to everything or everyone I wanted to, but here is a smattering of my highlights of the show.

Probably the biggest excitement for me was the in-person updates on the PNG SEASMART program. I have been lucky enough to dive in the area where the program is taking place, and was excited when I first heard about it because the area is really chock full of diversity. At the same time I was worried because the program was using some of the same sounding green/local/sustainable rhetoric that seems to come with start-up collecting stations but that rarely pans out.

But it seems like PNG SEASMART is really making a go of being successful by sticking to its initial promises. Educate and train the locals in sustainable Total Allowable Catch limits and non destructive collection methods. Less volume, more value (to quote a recent meme). Local ownership and management. Involving PNG government in every aspect of the project so it can be built intelligently for the long term. Provide transparency and information to the hobbyist so everyone can see the reality of the project. The local PNG-ers at the show were fun, approachable and enthusiastic. David Vossler was eager to engage in conversation about how to do things better. They even invited anyone who wants to get over to PNG to come see what they are doing. The program isn’t perfect yet, but from what I have seen so far, PNG SEASMART has a real shot at getting it right.

The standout talk for me was FIJI: TEN YEARS AFTER THE CORAL APOCALYPSE, by Dr. Bruce Carlson. This talk chronicled several areas of reef in Fiji that were hit hard by the 1998 bleaching event. Video of 30 meter line transects year after year showing the damage to reefs by bleaching events and their astounding ability to recover in 10 years or so was really informative and inspiring. Not only video, but data! I love data! Data about how many coral species and what area they cover and how those ratios change over time after bleaching was some amazing work and great documentation (early in recovery there are more coral species with less overall coverage, later in the recovery there are fewer coral species with great overall coverage). Most interesting was seeing the damage that storms can do to these reefs. Seeing a thriving area of reef one year, and a desolate plain the next after a storm really drove home for me how dynamic natural reef systems are. The upshot of the talk is that reefs can recover from storms and bleaching events, but if these kinds of events occur too often, there could be real problems.

The Marine Breeders Initiative (MBI) held the first ever roundtable discussion about captive breeding and getting animals to market. The event was well attended, interesting and informative. While it wasn’t long enough to really get into the meat of the discussion, it was a wonderful was to set the stage for this kind of important, ongoing in person discussion – which is very different from the equally important continuing online discussion.

A highlight for me on a purely personal note was both the attendance and reaction to my talk on Cephalopods. It was well attended (something I was trepidatious about given the talks that were going on at the same time) which is very exciting to me – a hard core ceph fanatic. What got me through, was getting a completely unexpected round of applause for showing captive mating and a captive Flamboyant hatchling. I was honored to be speaking at MACNA in the first place, and even more humbled that people were excited about my recent work.

If you are luckily like me, you live in an area with a thriving reefing community. Local clubs bring people together, share ideas and get everyone involved going in a good direction. However, after a time, that direction can get a little unidirectional and we can forget that other approaches are really important, that perspectives different from our own, or our locality, have merit. Attending a MACNA with attendees from across the country and around can really give you a reality check and open your eyes to possibilities. MACNA 2010 had everything I could have wanted. Did I get to see everything and talk to everyone? No, but there’s always Des Moines next year.

Thanks to everyone involved in making the show happen, vendors, speakers, attendees, photo bombers, party hosts – especially the hosting club ORCA. I hope you are all lying around recovering bathed in the glow of a job well done and in the appreciation of the greater reef keeping community.

more information…

Share on digg

SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 1
SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 1

The New TWIN Power SKIMZ Monzter “Hybrid” internal protein skimmer is the result of successful development in integrating cylindrical and cone shape chambers in our quest to produce the most effective skimmers. This successful design minimizes sharp edges within the skimmer body, thereby minimizing pre-mature bubble bursting and surface agitation.

Together with the use of the bubble plate design to reduce turbulence within the skimmer chamber, maximum air flow capacity can be achieved in our compact skimmer. This result in the reduced height of the skimmer; allowing the TWIN Power SKIMZ Monzter “Hybrid” to easily fit into most installations.

All SKIMZ Monzter E series skimmers are fitted with the new SKIMZ E Pumps. SKIMZ E Pumps are jointly developed with Italian pump manufacturer, using the most advanced material for the needlewheel impeller, “seamless-coated rare earth magnet” for unsurpassed durability and performance. The SKIMZ E pumps are available in 3 models: E2000, E2800 and E5000.

SKIMZ’s latest design allows cleaned water to exit the skimmer chamber at its base where it is almost bubble-free. Precise adjustment of the water level within the skimmer body can now be easily achieved using the new Micro-adjustable Valve.

Skimz E Series internal model is designed for in-sump use. No feed pump required, skimmer draws water directly from sump.

Features:

– Cylindrical cone shape body
Skimz high performance ‘E Skimmer Pump’
– Bubble plate design reduces bubble turbulence
– Micro-adjustable Valve for easy and precise setting
SKIMZ’s latest design allowing exit of bubble-free cleaned water
– Twist-lock neck for easy cup removal
– High precision CNC machined parts

SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 2
SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 2

SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 3
SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 3

SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 4
SKIMZ E-SERIES MONZTER INTERNAL PROTEIN SKIMMER SM251 VIEW 4

Share on digg


Steve Allen (left), outgoing president of MASNA, presents the Aquarist Of The Year trophy to Matthew L. Wittenrich. Thanks to Jessy Timko of Reef Addicts for sharing her photos with us!

MACNA XXII, MASNA 2010 Aquarist of the Year Award – Matthew L. Wittenrich


Matt Wittenrich accepts the MASNA 2010 Member of the Year award.

Past Recipients:

1995 Martin Moe, Jr.
1996 Tom Frakes
1997 Bill Addison
1998 Dr. Bruce A. Carlson
1999 Scott Michael
2000 Larry Jackson
2001 Dr. Ron Shimek
2002 Eric Borneman
2003 Anthony Calfo
2004 Julian Sprung
2005 Bob Fenner
2006 Sanjay Joshi
2007 Randy Holmes-Farley
2008 Charles Delbeek
2009 Matt Pedersen

more information in reefbuilders….

Share on digg

Skimz E-Series KONE Protein Skimmer SK181 view1
Skimz E-Series KONE Protein Skimmer SK181 view1

The New Skimz KONE Internal Protein Skimmer is the successful result of blending state-of-the-art technology with attractive design.

Skimz KONE’s conical-shape has distinct design advantages – the bubbles in the reaction chamber are forced to move vertically upward, resulting in natural foam formation to minimize bubble bursting. This natural foam formation of the bubbles reduces surface agitation, thus creating a gentle foaming within the skimmer and results in increased skimming efficiency. Together with the use of the bubble plate design, turbulence within the reaction chamber is significantly reduced, allowing maximum air flow capacity in a compact skimmer.

Every KONE range of product is hand-crafted with the highest quality materials and precision CNC machined.

Skimz SK181 – For aquarium from 200 – 1,200L
Skimz SK201 – For aquarium from 800 – 2,000L
Skimz SK251 – For aquarium from 1,000 – 3,000L

Skimz E-Series KONE Protein Skimmer SK181 view2
Skimz E-Series KONE Protein Skimmer SK181 view2

Skimz E-Series KONE Protein Skimmer SK181 view3
Skimz E-Series KONE Protein Skimmer SK181 view3

Skimz E-Series KONE Protein Skimmer SK181 view4
Skimz E-Series KONE Protein Skimmer SK181 view4

Share on digg

Skimz E-Series Calcium Reactor CM122 view2
Skimz E-Series Calcium Reactor CM122 view1

The new Skimz E-Series Calcium Reactor CM122 is using the same design as the previous model but with smaller footprint. It also maintain the Cone-Shaped Gas Channeling Chamber (GCC) at the top the reactor will help to channel undissolved CO2 upwards to recirculate back into the reactor via the Recirculation Pump. The body of Skimz CM122 is 120mm and CM150 is 150mm. As for the Skimz CM202 and CM202H are using the same body of 200mm, but the CM202H’s height is 1m.

Skimz CM122 – For aquarium up to 1,000L
Skimz CM152 – For aquarium up to 1,500L
Skimz CM202 – For aquarium up to 2,500L
Skimz CM202H – For aquarium up to 5,000L

Skimz E-Series Calcium Reactor CM122 view2
Skimz E-Series Calcium Reactor CM122 view2

Skimz E-Series Calcium Reactor CM122 view3
Skimz E-Series Calcium Reactor CM122 view3

Skimz E-Series Calcium Reactor CM122 view4
Skimz E-Series Calcium Reactor CM122 view4

Share on digg

The ATI Powercone, featuring their unique Gridwheel impeller, will be unveiled to U.S. Aquarists at MACNA 2010. Greg Morgan and the Reef Geek crew will have the new ATI PowerCone on display; we’re looking to seeing how quiet that 3,000 lph @ 35w really is. Gridwheel diagram from ATI’s patent While researching the new ATI PowerCone skimmer, […]

The ATI Powercone, featuring their unique Gridwheel impeller, will be unveiled to U.S. Aquarists at MACNA 2010. Greg Morgan and the Reef Geek crew will have the new ATI PowerCone on display; we’re looking to seeing how quiet that 3,000 lph @ 35w really is.

While researching the new ATI PowerCone skimmer, we have dug up German patent applications on the new Gridwheel design. This is an important step for ATI to retain their intellectually property and will hopefully slowdown the copyshops. If the Gridwheel performs as well as we believe it will, 3rd party licensing may be a viable option. For those fluent in German you can find the patent under application number: DE202010003425U1.

Additional information from the ATI Press Release:

ATI PowerCone 160 w/ Pump – Coming Soon

•Up to 150 Gallons
•US$399.95

ATI PowerCone 200 w/ Pump

•100-250 Gallons
•US$459.95

ATI PowerCone 250 w/ Pump

•250-500 Gallons
•10.0″ x 18.1″ x 21.7″
•US$529.95

The ATI PowerCone Skimmer combines several new innovations

to produce a skimmer with unsurpassed efficiency and exceptional performance. At the core of the design is the innovative Grid-wheel impeller that combines the stable performance of a needle-wheel with the superior performance of a thread/mesh-wheel impeller.

This Grid-wheel impeller combined with an improved air injection nozzle to increase air intake and an optimized pump housing to improve water flow produces a skimmer with unmatched performance. The ATI PowerCone is the perfect merger of modern advances in skimmer technologies and affordable pricing making it a truly unbeatable value.

Unmatched Performance: The high-volume of air flow combined with the Grid-wheel impeller to chop it all up produces an incredible amount of tiny, waste removing bubbles resulting in an extremely dense and uniform water air mixture. And the design of the skimmer body allows these bubbles to remain in contact with the water for a long period of time resulting in a skimmer that easily outperforms much larger skimmers. The significantly higher surface area of the Grid-wheel impeller easily outperforms traditional needle-wheel impellers.

Stable Performance: Grid-wheel impeller produces consistent, long-term performance as it won’t break apart and wear out like thread/mesh-wheel impellers.

Energy Efficient: Uses just 35 watts of energy while pulling in 3000+ lph of waste removing air.

Easy To Use: Built-in water-level adjustment valve allows for easy and precise fine-tuning of the skimmers performance. The base of the skimmer can be adjusted to change the position of the water outlet and many parts of the skimmer can be easily taken apart for cleaning.

Quiet Operation: Produces minimal noise due to innovative pump and skimmer body design and built-in air silencer.

Excellent Build-Quality: Constructed of high-quality materials and assembled using modern production techniques.

Distributor of ATI product in Singapore, Malaysia and Indonesia: AquaMarin Aquatic Pets

Share on digg

By: Brandon Klaus

ATI Aquaristik, the maker of several great aquarium products, including the very stylish and very popular ATI Powermodule T5HO light fixtures, is set to release a new protein skimmer onto the market. The ATI PowerCone protein skimmer will feature a lot of the newer technologies that all of the protein skimmers are starting to use, including a conical shape, low energy pump, a bubble diffusing plate, and silicone connections between the pump and skimmer body to reduce noise. But the thing ATI is doing much differently is the impeller and how the skimmer draws in air.

The most noticeable difference in this skimmer, when compared to every other skimmer on the market, is its extremely unique impeller. ATI has ditched the traditional needlewheel, going for a lattice structure instead. Dubbed the “Gitterrad”, this grid impeller vastly improves the surface area to achieve much greater performance. One way of looking at it is to compare it to a meshwheel. The meshwheel impeller is achieved by adding a couple of layers of hard plastic mesh to a standard needlewheel, ramping up the total surface area and overall performance. The downside to the meshwheel is the plastic breaks down very quickly and it requires regular replacement. ATI’s new impeller combines the stability of a needlewheel impeller with the performance of a meshwheel.

Continue reading below to see the new venturi adapter being used on these new ATI PowerCones.

Another interesting feature of the ATI PowerCone skimmers is the way in which they draw in air. Traditional venturi adapters draw in water from the center hole of the adapter and air from the outside. This design, according to ATI, only allows for a maximum, yet rarely achievable, 1:1 air to water ratio. The venturi adapter on the new PowerCone will do just the opposite, drawing air through the middle of the adapter instead of the sides. This design allows for an air to water ratio of 1.5:1. The Sicce pump used by the PowerCone will draw in 2700 l/h of air , while only using 35watts of energy.

To date, only the PowerCone 250 has been displayed online, but like with the older BubbleMaster, the PowerCone will come in three models: 250, 200, and 160. Prices are still unknown at this point, but I imagine they will be similar to those of the BubbleMaster as well. The details are fairly abundant at this point, and as more information on these skimmers surfaces, we’ll post them.

Distributor of ATI products for Singapore, Malaysia and Indonesia: Aquamarin Aquatic Pets

Information from: blog.aquanerd.com/2010/08/atis-newest-skimmers-the-powercone.html

Share on digg

reef_nutrition_tet_chui

Reef Nutrition: Phyto-Feast FAQ

YES – Phyto Feast Live is ALIVE! Over 95% of the cells are alive when bottled and much of it will stay alive for several months.

Check out the viability report from the CCMP

All the microalgae that go into Phyto-Feast Live are grown at our farm in California, harvested live and packed and shipped “farm fresh” every week. Once harvested the algae are induced to become “quiescent,” in “suspended animation.” At the time of bottling 95% or more of the algae are alive.

In this quiescent state metabolic activity and respiration are reduced to minimal levels and the nutritional value of the algae and the integrity of the cell membranes are preserved. The process is similar to cryopreservation where alga can be frozen live for years and remain viable.

Not all of our algae species are equally hardy and over time some of the more delicate cells begin to expire. However some cells will remain viable for two months or more.

Because of the unique quiescence process that is applied to the algae, the cells remain intact and they retain their full nutritional value long after they have ceased metabolic activity. Properly stored, a bottle of Phyto-Feast will provide the same value at two-plus months that it did on the first day.

Does Live Algae Make a Difference?
Yes and No. Cell integrity is critical. Live cells are a clear indication of quality, intact and unprocessed cells. However, microalgae can often retain these qualities when handled properly, whether viable or not.

Can I see Phyto-Feast Live swimming under my microscope?
No. Many kinds of algae do not swim. Other kinds “swim” by the beating of flagella. As a survival response algae lose their flagella under certain conditions – such as during the harvesting process. The flagella don’t grow back so you won’t see any of the algae swimming.

Will microalgae add phosphate and nitrate to my system?
Yes – in very small amounts. There are no added phosphate and nitrates in Phyto-Feast, however these are critical components of all plants so it’s impossible for any microalgae product not to contain some amount. If you have a refugium with some seaweed (Macro-Feast), the seaweed should help pull some of the P&N out of your system. If you experience elevated phosphates there are many products on the market to help lower them, such as Granular Ferric Oxide (GFO).

Phyto-Feast will add much less phosphate and nitrate than algae you grow at home. The algae in Phyto-Feast is separated from the growing media during harvesting, so the only P&N is the small amount actually in the cells, not the media.

There is also a very good article about this by Eric Borneman at reefkeeping.com.

Why is a complete Omega-3 fatty acid profile important?
Omega-3 fatty acids (EPA, DHA, and ARA) are considered essential fatty acids, which means that they are essential to animal health but cannot be manufactured by animals. For this reason, omega-3 fatty acids must be obtained from food. Omega-3 fatty acids can be found in fish and certain plant oils, especially marine microalgae. Also known as polyunsaturated fatty acids (PUFAs), omega-3 and omega-6 fatty acids play a crucial role in brain function as well as normal growth and development.

Different algae can be very different in their Omega-3 fatty acid content. Some, such as Chlorella, contain no EPA or DHA. So it is very important to feed your tank a mixture of carefully chosen algae species for complete and balanced nutrition. The algae in PhytoFeast were specially selected to provide high levels of EPA, DHA and ARA.

Will Phyto-Feast decompose and foul my system?
No. Phyto-Feast cells are intact and not broken so bacteria cannot quickly break them down and cause them to decompose.

Do I need to worry about bacteria or algae blooms if I use Phyto-Feast?
Typically No. Bacterial blooms are typically caused by significant amount of uneaten biomass remained in your system for several days due to overfeeding. Please adhere to the feeding instructions on the bottle to minimize the likelihood of this happening. When first using Phyto-Feast, we recommend you begin at the lowest recommended level and increase as your tank becomes accustomed to the new feed.

Your protein skimmer will likely remove any excess Phyto-Feast from your system.

Which of my animals will feed on Phyto-Feast products?
Some soft corals, sponges, tunicates, gorgonians, sea fans, Basket and Feather Stars, Clams, Mussels, Barnacles, Feather Dusters and Tridachnid clams.

Phyto-Feast™ – Directions & Storage

How Much to Feed?
If you have not used Phyto-Feast™ Live before, start with 1 drop per gallon each day (100 drops = 1.3 teaspoons or 6.5 ml’s) . Your animals will rapidly become accustomed to the phytoplankton (microalgae) and be able to feed on quite a bit more. Common dosage for a mature system is 1-5 drops per gallon each day, depending on your tank setup and animal density.

If your animals do not “clear” the water in less than an hour – back off on the amount you are adding because your systems is not fully digesting all the microalgae.

Always shake the bottle a few times before opening it. The larger algae cells such as Tetraselmis tend to settle to the bottom.

We recommend turning off your skimmer before adding the algae. Many customers have been successful by putting their skimmer on a vacation timer so it automatically turns back on later in the evening (2 hours is a good window).

Tank Size Minimum (Daily)
10 gallons 10 drops (0.65 ml)
50 drops (3.25 ml)

Suggested Maximum (Daily)
100 gallons 100 drops (6.50 ml, 1.3 teaspoon)
500 drops (32 ml, 6.5 teaspoons)

Storage
Phyto-Feast must be stored in your refrigerator. The best place to store algae is the bottom shelf, it is the coldest place in your refrigerator. The worst place to store it is the refrigerator door – it is too warm. Phyto-Feast cannot be frozen – that will break many of the algae cells.

For more information…

Share on digg

Eco_Lamp_KR92_leaflet

Sanjay Joshi PH.D released his latest review of the KR92 in the February 2010 issue of Advanced Aquariust Online Magazine. His article “Quantitative Comparison of Lighting Technologies: “Metal Halide, T5 Fluorescent and LED” can be viewed here.

Based on this quantitative data, is its quite obvious that the LEDs have come of age in providing a viable solution to lighting reef aquaria.

Eco-Lamp Aquarium Gallery…

For more information: www.aquamarin.com.sg/aproducts.asp?bcID=338&catname=LED Lightings

Distributor for Singapore, Malaysia and Indonesia: Aquamarin Aquatic Pets

Share on digg

Hola a tod@s, espero que hayais disfrutado de vuestras vacaciones, yo no puedo decir lo mismo, he disfrutado trabajando.

Aprovecho este hilo para dar las gracias a la familia VALDES & VALDES, por apostar por esta gran afición, gracias por introducir productos que sinceramente en calidad-precio son únicos. Mundi Aquarium Center se siente orgulloso de poder decir que pone a la venta unos skimmers de una calidad increíble.

Cuando he visto los skimmers no me he podido resistir y me he vuelto loco. He sustituido el skimmers anterior que era bastante bueno por este PEPINAZO!!!!!!!!!!!!!!!! de skimmer que sólo de tenerlo en mis manos me he enamorado de él.

Con la ayuda de mi amigo Tómas nos decidimos a montar el skimmer, la verdad es que ha sido una gozada empezar a colocar las bombas. Productos asi hacen que disfrutes esta afición al máximo.

Para dejar testimonio del skimmers os cuelgo algunas fotillos

Tomasín se echa las manos a la cabeza sorprendido de ver el volumen del skimmers.


Tomasín y antoñito haciendo comprobaciones tecnicas del skimmers diciendo ” seremos capaces de montar este pepinazo”


Tras conseguir el objetivo de montaje, os comento que es muy fácil, Tómas tardo 10 minutos en montarlo, si lo hago yo tardo cinco…


Procedemos a colocar el skimmers en la mesa de coral.


Objetivo conseguido.

more information:
www.mundiaquariumcenter.es/foro/viewtopic.php?f=83&t=499&start=20#p23832
www.skimz.sg/blog/?p=782

website: www.skimz.sg

Share on digg